Сhecked, unfortunately nothing has changed
I disabled the triggers on the scroll buttons so they wouldn’t interfere
I also turned the mouse off and replugged the USB dongle, app restarted too
LOGI_LOG.txt (169.4 KB)
.
Would be great if you could test once more with 6.036 alpha I just uploaded (and if it still doesn't work after turning the mouse off and on again post the logs again)
@Andreas_Hegenberg
I checked version 6.036, still doesn’t work 
In this version, I noticed that the configured DPI of 800 doesn’t work — the mouse is way too sensitive.
I tried changing it to other values, but they don’t apply (neither after clicking “Apply All Settings Now”, nor after restarting the application, nor after unplugging the mouse).
EDIT: (I’ve just noticed that the DPI value does change after all, just with a delay. It seems like it gets applied, then reverts, then gets applied again, and this happens several times.)
LOGI_LOG.txt (169.9 KB)
After alpha 6.034 and later, when scrolling over the top of the page or under the bottom of the page there is a stretching effect.
Before alpha 6.0.34 this was controlled by “Simulate Trackpad Phases”
Now it does seem to always do this effect.
I will add an option to disable this trackpad like behavior, but it will break any trackpad like scrolling features (e.g. horizontal scroll in calendar, horizontal scroll to archive mails, scroll to navigate in safari etc.). This is because the trackpad scrolling will always have these overflow effects
Hi @Andreas_Hegenberg ,
I just played around with the "Smooth Scrolling (like Trackpad)" modifier and it seems that my normal actions triggered by e.g. Scroll Up/Down are no longer triggered when this modifier is active.
For demonstration purpose I set a HUD to Scroll Down, see video. Tested with 6.042.
Do you have any hints or thoughts on this one?
this is on my todo list for today scroll actions currently don't work with that modifier yet
However we'll need to see how that influences the smoothness (condition checking etc. might cause slight visible delays)
Unfortunately, mouse scrolling still doesn’t work in version 6.044 on the G604
Scroll Up and Scroll Down are still mapped as Button 13 and Button 14
LOGI_LOG.txt (169.5 KB)
6.049
- Scroll Down worked as Track Pad scroll with giga acceleration
- Scroll Up still detected as Button 14
Close
LOGI_LOG.txt (170.8 KB)
Could you check again with 6.050 (I'm kind of guessing the correct ids because I can't get a G604 right now, it seems like this one is discontinued)
6.050 will be available in 5min
Hello Andreas, Did you have time to look into including the MX Anywhere 3s?
Yes I have the MX Anywhere 3s but couldn't find any issues with it. Can you maybe describe again what you are encountering?
I wanted to configure the middle button located below the wheel next to the LED. This is the toggle button, which by default removes the scrolling brakes . when I try to configure it, it seems that it's not detected when I press it. What is the name of the button in BTT?(button 3, middle mouse button? )
My MX Anywhere 3s reports the button as "button 7".
Are you sure you have completely removed the logitech options software?
Checked 6.050
- When scrolling down, the direction is now inverted and it triggers Scroll Up, but the acceleration is smooth and perfect, exactly as it should be (Invert Main Scroll Wheel off, Inverse scrolling for normal mouse in mouse settings also off)
- When scrolling up, it’s still Button 14
LOGI_LOG.txt (170.0 KB)
super it works 
6.050 Logitech G604
Without “Enable High Resolution Scrolling”, scrolling down works as expected, with no false triggers.
I also noticed this: if you reset everything by clicking “RESET mouse to factory settings”, both scroll directions work (they didn’t in previous versions), the direction is not inverted, and the scrolling is not as smooth.
ah that's good. You most likely don't need "Enable High Resolution Scrolling" - this might not be supported on the G604. You can get smooth scrolling by adding the "smooth scroll" modifier.
@volker scroll triggers should now also work with smooth scrolling enabled
Thank you, already checked and can confirm so far.